Differences

This shows you the differences between two versions of the page.

--- software:ipcams [2022/10/23 19:56] – vektrat
+++ software:ipcams [2022/10/30 20:52] (current) – [Initial IP Cam configuration] vektrat
@@ Line 32: / Line 32: @@
   * Camera should be accessible via app, enter the config
     * Add WiFi settings (so that the cam can connect to the home's wifi)
+      * :!: IMPORTANT: if WiFi is enabled, you won't be able to connect directly to the camera via phone anymore and to disable the WiFi you can only reset to factory settings
+      * If not setting WiFi, you can access the camera via the phone's chrome with the assigned IP, and updating further settings there (like removing watermarks, fixed IP, etc)
     * Update software
     * Update password
-    * Set controlled fixed IP
+    * Check current IP and set controlled fixed IP via http://192.168.1.108/ (update with current IP)
+|                	| **IP**        	|
+| **IR cam**     	| 192.168.1.120 	|
+| **Non IR cam** 	| 192.168.1.121 	|
+===== RTSP playback/access =====
+In order to test this, the best is to use VLC --> Media --> Open Network Stream...
+The URL to access to both camera's RTSP is:
+<code bash>
+rtsp://192.168.1.120/11
+</code>